Info
Content

Updating Firmware

In some cases we will issue firmware updates for the simulator. If needed you will get access to the newest firmware version directly from us and will not be available at all times. Here's a short guide to updating the firmware.

1. Download the updater and the firmware file (Your will receive a link by email)

2. UnZip the file to any folder.

3. Launch the XLoader.exe file and make the following changes.
XLoader_S-Drive.png

RC4v2 only
- Hex File: Choose the .ino.hex file located in the XLoader Folder. (S-Drive_M1-2)
- Device: Choose S-Drive(RacingCUBE)
- COM port: Choose the lowest COM port dedicated to CH340 (You can check Device Manager if uncertain)

RC4v3 only
- Hex File: Choose the .ino.hex file located in the XLoader Folder.
- Device: Choose S-Drive(RacingCUBE)
- COM port: Choose the available COM port (You need to restart the program if you plug in the simulator after starting XLoader)

4. Press Upload. After a few seconds it will say Upload Successful or similar.

RC4v2 only
Repeat the above with the second file (S-Drive_M3-4) and Highest COM port.

You are done and can now use the simulator as normal.

Back to top