READ THIS BEFORE USING THE SIMULATOR FOR THE FIRST TIME!
The Rotation Boom uses 100v - 240v AC power which can cause damage to people, animals and equipment if not used properly. You should always ground the system with the included power cable. We include a power cable that suits your region.
Before connecting the system to the power outlet, make sure that the contact on the Rotation Boom is OFF. Once connected to the outlet you can turn it on.
The Boom's IEC connector have a built in 10amp fuse to protect the system. This should be enough for most setups combined with an RC4 and a computer plus accessories.
When assembling the Boom, make sure no wires have taken damage or are stuck in the folding area of the platform. When bending the frame in place always check the cable while bending it.